Nokia E63 solution for white, blue and blank screen display problems - we say welcome to you who have been searching for information via search engines such as Google, in a blog
Tech Gallery, now we will discuss information about the Nokia E63 solution for white, blue and blank screen display problems , we have been looking for a lot of information from a trusted and collect it in this blog, so you get the information complete and easy to understand, please read through:
Article Nokia E63,
You can also see our article on:
Here's the solution for
Nokia E63
LCD display problems like
white screen, blank or
black screen displays. This solution may help if after flashing the device
firmware but nothing happens but the problem still exist.
The solution below show the display line paths from the LCD screen pin connector through to the EMI filter IC's. The ESD-EMI filter is located at the side of the PCB board near the application processor chip.
Nokia E63 LCD display problem solutions- LCD display IC jumper ways
You may replace check and replace one or both of those EMI filter IC if tryiong to fix display problem issues on Nokia E63. Trace the each corresponding line paths first for a water damaged device before
installing a Ne LCD display filter IC.
Information about the Nokia E63 solution for white, blue and blank screen display problems we have conveyed
A few of our information about the Nokia E63 solution for white, blue and blank screen display problems , I hope you can exploit carefully
You have finished reading
Nokia E63 solution for white, blue and blank screen display problems and many articles about Tech Gallery in our blog this, please read it. and url link of this article is
https://littlebitjohnny.blogspot.com/2014/03/nokia-e63-solution-for-white-blue-and.html Hopefully discussion articles on
provide more knowledge about the world of new tech gadgets.
,
You may replace check and replace one or both of those EMI filter IC if tryiong to fix display problem issues on Nokia E63. Trace the each corresponding line paths first for a water damaged device before installing a Ne LCD display filter IC.
0 comments:
Post a Comment